EPSIAE » eneraptor

h1. Devices

h2. Input devices (devices that provide measurements' values)

*Thermometer*
Device reports to logic:

* Current temperature (in °C)

Statistical analysis (user chooses the main time frame and a number of inner sections):

* Maximum temperature (in a series of time frames).

> eg.: [2010] = [45°C] (time frame: year 2010, inner sections: 1)

> eg.: [January, February, March] = [35°C, 41°C, 39°C] (time frame: from January to March, inner sections: 3)

* Minimum temperature (in a series of time frames)

> eg.: [from January to March] = [9°C] (time frame: from January to March, inner sections: 1)

> eg.: [1.1.2010, 2.1.2010, 3.1.2010] = [10°C, 8°C, 9°C] (time frame: from 1.1.2010 till 3.1.2010, inner sections: 3)

* Average temperature (in a series of time frames)

> eg.: [Summer 2010] = [39.46°C] (time frame: whole Summer, inner sections: 1)

> eg.: [Summer 2010, Fall 2010, Winter 2010] = [39.46°C, 36.10°C, 25.85°C] (time frame: from start of Summer 2010 till end of Winter 2010, inner sections: 3)

*Barometer*
Device reports to logic:

* Current air pressure

Statistical analysis (user chooses the main time frame and a number of inner sections):

* Maximum air pressure (in a series of time frames).

* Minimum air pressure (in a series of time frames)

* Average air pressure (in a series of time frames)

*Hygrometer*
Device reports to logic:

* Current air humidity

Statistical analysis (user chooses the main time frame and a number of inner sections):

* Maximum air humidity (in a series of time frames).

* Minimum air humidity (in a series of time frames)

* Average air humidity (in a series of time frames)

*Light sensor*
Device reports to logic:

* Current room luminosity

Statistical analysis (user chooses the main time frame and a number of inner sections):

* Maximum room luminosity (in a series of time frames).

* Minimum room luminosity (in a series of time frames)

* Average room luminosity (in a series of time frames)

*Computer clock*
Device reports to logic:

* Current time

Statistical analysis : none. Clock is used to trigger actions which depend on current time.

"*Smart meter*":http://en.wikipedia.org/wiki/Smart_meter *Smart meter*:http://en.wikipedia.org/wiki/Smart_meter
Device reports to logic:

* Current energy consumption (in kWh)

Statistical analysis (user chooses the main time frame and a number of inner sections):

* Average energy consumption (in a series of time frames)

* Sum of energy consumption (in a series of time frames)

* CO2 produced (in a series of time frames)

* Electricity costs in EUR (in a series of time frames)

h2. Controllable devices (by logic)

*Air conditioner*
Available operations:

* Increase temperature by X (paramteres: X = number of °C)

* Decrease temperature by X (paramteres: X = number of °C)

* Turn device X (paramteres: X either ON or OFF)

*Windows manager*
Available operations:

* Set windows to X (parameters: X = percentage of window openness. X = 0 closes windows. X = 100 opens windows completely.)

*Window blinds manager*
Availible operations:

* Set blinds to X (parameters: X = percentage of blinds openness)

*PC power manager*
Availible operations:

* Set number of active PC's to X (parameters: X = number of PC's that are powered on)

* Set PC X to state Y (parameters: X = PC id number. Y = either ON or OFF)

*E-mail notification sender*
Availible operations:

* Send e-mail Y to address X (parameters: X = e-mail address. Y = e-mail content.)